When Windows 11 installation has failed, work through four fixes in order: free up disk space, run the Windows Update troubleshooter, clear the update cache, then reinstall with Microsoft’s Installation Assistant or Media Creation Tool.
Before any of it, write down the error code, because it tells you which fix to skip to.
Read the error code before you fix anything
Microsoft’s upgrade error documentation, written for Windows 10 upgrades, maps these codes:
| Code | What Microsoft says it means | Try first |
|---|---|---|
| 0x80070070, 0xC190020e | Not enough free space to install the upgrade | Fix 1: free up disk space |
| 0xC1900101 (any suffix) | Generic rollback, usually an incompatible driver | Unplug extra devices, update drivers, then Fix 4 |
| 0xC1900107 | Cleanup from a previous attempt is still pending | Restart, then run setup again |
| 0xC1900200 | PC doesn’t meet the minimum system requirements | Check TPM 2.0, Secure Boot, 64 GB storage |
Source: Microsoft Learn, upgrade resolution procedures, checked November 19, 2026.
One trap: a 0xC1900101 is a driver rollback, so clearing disk space won’t fix it. Microsoft’s advice is to disconnect everything except the mouse, keyboard and display, then update drivers and BIOS. You can re-pair Bluetooth gear afterwards, the same way you would connect AirPods to a Windows laptop.
If a 0xC1900107 survives a restart, the same document says to run Disk Cleanup on temporary files and system files before trying setup again.
Fix 1: free up disk space
The Installation Assistant needs 9 GB free just to download Windows 11. Go to Settings > System > Storage > Cleanup recommendations and clear temporary files, large unused files and unused apps.
Still short on internal space? Setup can use an external USB drive during the upgrade. Microsoft asks for at least 8 GB (16 GB recommended), formatted NTFS, because FAT32 drives can hit file size errors.
Careful with the previous version of Windows, which Cleanup recommendations lists for 10 days after an upgrade. Deleting it removes Windows.old, and Microsoft warns that can’t be undone.
Fix 2: run the Windows Update troubleshooter
On Windows 11, Microsoft points you to the automated troubleshooter in the Get Help app first. The manual route is Settings > System > Troubleshoot > Other troubleshooters, then Run next to Windows Update.
Restart when it finishes, then check for updates again.
Video: Quickstruct
Fix 3: clear the SoftwareDistribution folder
Microsoft lists this reset as a last resort for Windows Update problems, so try Fixes 1 and 2 first. It uses an elevated Command Prompt (right-click Command Prompt, Run as administrator):
- Type net stop wuauserv and press Enter.
- Type rd /s /q %systemroot%\SoftwareDistribution and press Enter.
- Type net start wuauserv and press Enter.
This clears the cached update files, not your personal files. If that fails, Microsoft’s longer reset also stops BITS and the Cryptographic service and renames catroot2, but it lists that as a later step.
Fix 4: install fresh with the Installation Assistant or Media Creation Tool
Both are on Microsoft’s Windows 11 download page. The Installation Assistant upgrades the PC you’re on. It needs a Windows 10/11 license, Windows 10 version 2004 or later, and an x64 processor, since it doesn’t run on Arm PCs.
For a clean install, or when the Assistant fails too, build a USB stick of at least 8 GB with our Media Creation Tool USB guide. If the tool hangs, see Media Creation Tool stuck at 0 percent. Back up first, because a clean install erases the drive you pick.
FAQ
Why does Windows 11 installation keep failing at the same percentage?
Match your code to the table first. Microsoft ties 0xC1900101 to drivers and 0x80070070 to disk space, so unplug extra devices and free up space before the next try.
Will these fixes delete my files?
Fixes 1 to 3 keep your files, though deleting Windows.old removes your rollback option and Microsoft says that can’t be undone. A clean install from USB erases the drive you select, so back up anything you can’t replace before Fix 4.
Where are the Windows setup log files?
Microsoft points to Setuperr.log and Setupact.log in the %windir%\Panther folder. For a 0xC1900101-0x20017 rollback, Microsoft says to open them and locate the problem drivers.


