Roku Wireless Speakers pair with a Roku TV and nothing else you are likely to own. Roku’s product page puts it in one line: requires a Roku TV, does not work with other TVs, sound systems or Roku streaming players.
Plug a Streaming Stick into a Samsung and the speakers never appear. The original Roku Streambar and Streambar Pro also took them as rear surrounds, but Roku lists both as discontinued, and the current Streambar SE refuses them outright.
Check that your TV is a Roku TV, not a TV with a Roku plugged in
A Roku TV runs Roku OS from the TV’s own board. A Roku player is a separate stick or box on an HDMI port, and the speakers ignore it. That split decides whether this $149.99 pair works or goes back in the box.
Look at the bezel. A Roku-made set has the Roku logo bottom centre; a TCL, Hisense or onn set carries the maker’s name plus a small Roku TV badge in the corner. Or open Settings, System, About and look for a Roku TV support line.
Still unsure? Our guide to what the Roku operating system actually controls covers the TV versus player split.
What each host lets you build
The host sets the ceiling. Roku’s support pages give these limits.
| Host device | Roku Wireless Speakers | Max speakers | Role |
|---|---|---|---|
| Roku TV (Select, Plus, Pro Series or partner brand) | Yes | 2 | Front stereo, TV speakers switch off |
| Roku Plus or Pro Series TV with Roku TV Wireless Soundbar | Yes | 2 | Rear surround, 4.0 or 4.1 with a sub |
| Roku Streambar or Streambar Pro (discontinued) | Yes | 4 | Surround |
| Roku Streambar SE | No | 0 | Subwoofer only |
| Roku Streaming Stick, Express, Ultra | No | 0 | None |
| Non-Roku TV or soundbar | No | 0 | None |
Two details trip people up. A Roku TV takes two speakers, not four, so surround on a TV needs the Roku TV Wireless Soundbar as the front stage, and only Plus and Pro Series sets allow that combination.
And once the speakers connect, the TV’s built-in drivers go silent.
A Roku Wireless Bass or Wireless Bass Pro joins any working setup above, and it is the only add-on the Streambar SE accepts. Our Streambar SE breakdown covers that dead end.
Pairing takes one long press
Plug each speaker into a wall outlet and wait for the spoken prompt. Hold Home on your Roku remote for five seconds and pick Wireless speakers, or go through Settings, Remotes and devices, Set up a new device.
Each speaker chimes in turn and you assign it left, right or surround. Range is 30 feet from the host, and every speaker needs its own outlet.
Two snags Roku documents. Pairing runs over Wi-Fi, and some Roku TVs shut Wi-Fi off on Ethernet, so unplug the cable, pair, then reconnect.
And if a Streambar is already attached to the TV, the speakers will not pair to the TV at all, only to the bar as surrounds. If it is a remote you are pairing instead, see the Simple, Voice and Pro remote comparison.
The Bluetooth loophole and its limits
Once paired to a Roku TV, the speakers accept Bluetooth from a phone, tablet or laptop, and with Fast TV Start on they play with the screen off.
It is not a way around the compatibility wall. Bluetooth only switches on after the speakers are paired to a Roku host, so a Samsung owner cannot use them as plain Bluetooth speakers.
The box holds two speakers and two power cables. Stands are extra and must hold 4 pounds on a quarter-inch 20-thread post.
Do Roku Wireless Speakers work with a Roku Streaming Stick or Ultra?
No. Roku’s support and product pages both state they will not work with Roku streaming players. The host has to be a Roku TV or a discontinued Streambar or Streambar Pro.
Can I use four Roku Wireless Speakers on a Roku TV?
No. A Roku TV pairs two speakers as a stereo pair. Four applies only to the Streambar and Streambar Pro hosts; surround on a TV needs the Roku TV Wireless Soundbar up front.
Will the speakers pair if my Roku TV is on Ethernet?
Often not. Roku notes that some Roku TVs disable Wi-Fi on a wired connection, and pairing needs Wi-Fi. Disconnect the cable, pair the speakers, then plug Ethernet back in.
